2.333mm x 12mm Metric Slotted Pivot Set of 2 with HEX Screws for Balisong Butterfly Knives with Small Pivots or Handle Hardware.
Also perfect for sandwich pins for the handle.
We've Gone Metric Baby & With A Slot.
MADE IN THE USA
I had these custom made in Colorado, so these are high quality nothing but the best.
The absolute best small barrel pivot on the market for balisong butterfly knives.
Heat Treated for Low Wear.
440C Stainless Steel wich Rockwell Hardness of RC-58
2.33mm pivot with 0-80 screw.
So for you Standard guys that is 3/32" (0.0915")
Overall Diameter: 2.33mm
Overall Length: 12.19mm
Shaft Length: 10.66mm
Slotted Head Diameter: 3.53mm
The barrel pivot has an increased diameter to press fit one side into the frame, making the screw hold while tightening the screw on the other side.
This also stops the pivot screw from un-tightening from pivot spin.
The assembly comes with a 0-80 screws and the barrel pin studs.
Pivot that works perfect for balisong butterfly knives.
These can be used for pivot screws, these fit directly into models that have rivet construction.
If you have a broken butterfly then these are the perfect replacement part.
You will need to reem out the blade and handle to accept the pivot on most models so using a carbide reamer is the way to go
These can also be used for attaching sandwich constructed balisongs together, they are designed specifically for latch gate models and fit to latches with 1/8" hole mounts.
- Balisong Butterfly Knife UNASSEMBLED KITS
- Balisong Butterfly Beer Bottle Openers
- Balisong Butterfly Hair Combs
- Balisong Butterfly Razor Blade Utility Knife
- Balisong Butterfly Unsharpened Trainers
- Balisong Butterfly Knife Maintenance
- Balisong Butterfly Knife PARTS
- Bradley Cutlery Balisong Butterfly Knife PARTS
- Microtech Balisong Butterfly Knife PARTS
- Balisong Butterfly Knife Sheaths
- Balisong Butterfly Knife Directions, Instructions, & Help
|Your cart is currently empty|