NOW SOLD TO THE PUBLIC AT WHOLESALE PRICING !!!
Complete KIT Model You Build It Yourself - THIS ONE TAKES SOME EFFORT.
Exiled Cutlery Kickass Tachyon Titanium AUS8 Spring Latch Balisong Butterfly Knife KIT
Safe To Import To Australia, Canada, New Zealand & The UK & Anywhere in the World.
Kicking Everyone's Arse Down The Block & Back !!!
Made with everything that you want in a butterfly knife and doing what everyone else has not.
Aichi Steel 8A Mirror Polished Toyota Group AUS8 Stainless Steel Plain Edge Blade
Solid Titanium CNC Machined Sandwich Constructed Handles
5.5" Long Handles Solid Titanium Handle & A Square Stock Spring Latch
Square Spring Latch laser Etched : EXILED CUTLERY USA
Designed & Built in Denver, Colorado USA
- Blade Length: 3 3/4"
- Blade Thickness: 7/64"
- Blade Material: Aichi Steel 8A (AUS8)
- Overall Length: 9 1/4"
- Closed Length: 5 3/4"
- Weight: 4.0 oz
- HEX Head pivots with easy access to apply threadlocker
AUS-8 (also called 8A) is made by Aichi Steel Corporation and is a very homogenous ingot stainless steel with a very uniform grain structure, especially for a stainless steel. It seems to have the "right" amount of everything for good balance.
It is a stainless steel that is easy to reharpen because of the very uniform grain structure, it will take a razor edge.
57-58 Rockwell hardness.
It has also good resistance against rust and all around it is a great knife blade steel to use what more could you expect from Japan and Toyota.
Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical composition of 6% aluminium, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability.
"This alpha-beta alloy is the workhorse alloy of the titanium industry. The alloy is fully heat treatable in section sizes up to 15mm and is used up to approximately 400°C (750°F). Since it is the most commonly used alloy – over 70% of all alloy grades melted are a sub-grade of Ti6Al4V, its uses span many aerospace airframe and engine component uses and also major non-aerospace applications in the marine, offshore and power generation industries in particular."
Generally, Ti-6Al-4V is used in applications up to 400 degrees Celsius. It has a density of roughly 4420 kg/m3, Young's modulus of 115 GPa, and tensile strength of 1000 MPa. By comparison, annealed type 316 stainless steel has a density of 8000 kg/m3, modulus of 193 GPa, and tensile strength of only 570 MPa. And tempered 6061 aluminium alloy has 2700 kg/m3, 69 GPa, and 310 MPa, respectively.
YOU WILL HAVE TO SAND AND POLISH AND FIT THE HANDLES THESE ARE WATERJET CUT TITANIUM AND YOU WILL HAVE TO SAND AND POLISH AND MAKE THE GROOVES FOR THE TANG PIN AREA
- Balisong Butterfly Knife UNASSEMBLED KITS
- Balisong Butterfly Beer Bottle Openers
- Balisong Butterfly Hair Combs
- Balisong Butterfly Razor Blade Utility Knife
- Balisong Butterfly Unsharpened Trainers
- Balisong Butterfly Knife Maintenance
- Balisong Butterfly Knife PARTS
- Bradley Cutlery Balisong Butterfly Knife PARTS
- Kershaw Lucha Balisong Butterfly Knife PARTS
- Microtech Balisong Butterfly Knife PARTS
- Balisong Butterfly Knife Sheaths
- Balisong Butterfly Knife Directions, Instructions, & Help
|Your cart is currently empty|